R.D. JACOBS COMPANY
Dillon Catalog       Contact: Info@dynamometers.com


Test Fixtures : Compression Plates

Black Finish Compression Plates

compblk compblk

For general compression tests.

ŘA Fixing Thread Part No.
175mm (6.89in) 5/16 UNC 49755-0392


Flip Cap Accessory

flip flip

Designed to test the opening force of flip caps.

A B Rated Up To Fixing Thread Part No.
25mm (0.98in) 20mm (0.79in) 100N 10/32 UNF 49755-0079


Hardened and Ground Compression

comp comp

For spring testing and general compression tests.

ŘA Fixing Thread Part No.
12mm (0.47in) 10/32 UNF 49755-0285
19mm (0.75in) 10/32 UNF 49755-0293
50mm (1.97in) 10/32 UNF 49755-0301
70mm (2.76in) 5/16 UNC 49755-0319
100mm (3.94 in) 5/16 UNC top MWD TOP 49755-0327
100mm (3.94in 5/16 UNC bottom Fits MWD Base Plate 49755-0335


Top

Nickel Plated Compression Plates

comp comp

For general compression tests.

ŘA Fixing Thread Part No.
12mm (0.47in) 10/32 UNF 49755-0343
19mm (0.75in) 10/32 UNF 49755-0350
19mm (0.75in) 5/16 UNC 49755-0368
50mm (1.97in) 5/16 UNC 49755-0376
50mm (1.97in) 5/16 UNC 49755-0384


Self Levelling Compression Plates

slflvl slflvl

Self levelling compression plates allow parallelism to be set for accurate spring testing. Hardened and Ground. Supplied for either top or bottom use.

10/32 or 5/16 fixing thread available.

ŘA DIAGRAM Part No.
50mm (1.97in) 1 & 2 49755-0418
100mm (3.94in) 1 49755-0426
175mm (6.89in) 1 49755-0434


Vented Compression Plates

vntdcomp vntdcomp

Allows air-release during top-load testing. For use with tests to ASTM D2659.

ŘA Fixing Thread Part No.
50mm (1.97in) 10/32UNF 49755-0400


Top

R.D. Jacobs Company
Dynamometers, Crane Scales and Force Measurement equipment
Sales & Service 		email: info@dynamometers.com
Address: 500 Southeast Thirteenth Street
Fort Lauderdale, Florida 33316
Phone: 954.462.1932 Fax: 954.527.4466
©2006 R.D. Jacobs Company